How we work it out
We compare the floor area of the pans. Keep the depth the same and the dough or batter needed grows with the area.
Multiplier = your pans’ area ÷ the recipe’s pans’ area
- Square or rectangle: length × width.
- Round: π × radius², where the radius is half the diameter.
- More than one pan: add up the area of every pan. With a weight, the dough is split by each pan’s share of the area.
A 9×9" square is 81 in² and a 9×13" is 117 in², so multiply the recipe by 117 ÷ 81 = 1.44. A 900 g batter becomes 1,300 g.
When depth matters
Floor area assumes the batter sits as deep as it did in the recipe’s pan. A much deeper or shallower layer bakes differently, so check it sooner or later than the recipe says. Loaf and tube pans are tall for their floor area: treat the multiplier as a starting point and fill them about two-thirds full.
Common pans
| Pan | Area (in²) | Area (cm²) | From 9×9" |
|---|---|---|---|
| 8×10" | 80 in² | 516.1 cm² | 0.99× |
| 10×14" | 140 in² | 903.2 cm² | 1.73× |
| 9×13" | 117 in² | 754.8 cm² | 1.44× |
| Half sheet (13×18") | 234 in² | 1,509.7 cm² | 2.89× |
| 9×5" loaf | 45 in² | 290.3 cm² | 0.56× |
| 8.5×4.5" loaf | 38.2 in² | 246.8 cm² | 0.47× |
| 8×8" square | 64 in² | 412.9 cm² | 0.79× |
| 9×9" square | 81 in² | 522.6 cm² | 1× |
| 8" round | 50.3 in² | 324.3 cm² | 0.62× |
| 9" round | 63.6 in² | 410.4 cm² | 0.79× |
| 10" round | 78.5 in² | 506.7 cm² | 0.97× |
| 9" springform | 63.6 in² | 410.4 cm² | 0.79× |